The Best Value Automotive Multimeter
	11 Function: DC Voltage   AC Voltage   DC Current   Resistance   Frequency Counter   Temperature Test   RPM Measurement   Duty Cycle   Dwell Test   Diode Test   Continuity Buzzer Auto power off extends battery life Easy to Use single rotary switch 4 Feet drop proof Full test lead set (probes + clips) Optional protective holster with tilt stand

APPA 25 Digital Engine Analyzer

SPECIFICATIONS:(All specifications at 23oC ،س 5oC, less that 80% R.H.)

DC VOLTAGE: Range: 200mV, 2V, 20V, 200V Accuracy: (0.5% + 1d) Input Impedance: 10M ohm Overload Protection: 600 Vr.m.s. Resolution: 0.1 mV AC VOLTAGE: Range: 200V, 600V Accuracy:(1.5% + 5d) at 40Hz ~ 500Hz Input Impedance: 10M II < 100pF Overload Protection: 600 Vr.m.s. Resolution: 0.1V HIGH TACH: Range: 0 ~ 10000 RPM, reading x 10(4 cyl, 5 cyl, 6 cyl, 8 cyl) Accuracy: (1.5% + 50 RPM) Overload Protection: 250VDC/AC peak, within 20 sec. Resolution: 10 RPM LO TACH: Range: 0 ~ 2000 RPM (4 cyl, 5cyl, 6 cyl, 8 cyl) Accuracy:(1.5% + 5 RPM) Overload Protection: 250VDC/AC peak, within 20 sec. Resolution: 1 RPM DUTY CYCLE: Range: 0 ~ 100.0 % Accuracy: (1.5% + 2d) Overload Protection: 250VDC/AC peak, within 20 sec. Resolution: 0.1 % DWELL DEGREES: Range: 0 ~ 90.0oC(4 cyl)             0 ~ 50.0oC(6 cyl)             0 ~ 45.0oC(8 cyl) Accuracy: (1.5% + 2d) Overload Protection: 250VDC/AC peak, within 20 sec. Resolution: 0.1oC RESISTANCE: Range: 200 ohm, 2K ohm, 20K ohm, 200K ohm, 2M ohm. Accuracy: 200 ohm (0.8 % + 4d)                   2K ohm ~ 2M ohm (0.8 % + 1d) Overload Protection: 600Vr.m.s. DIODE & BUZZER: Open Circuit Voltage: 3.2V max. Accuracy: (1.5% + 5d) for test diode forward voltage Buzzer Description: Built-in buzzer sounds when resistance is less than 50 ohms Overload Protection: 500VDC/AC r.m.s. DC CURRENT: Range: 15A Accuracy: (2.0% + 3d) Overload Protection: 15A/250V fast blow fuse Resolution: 0.01A FREQUENCY COUNTER: Range: 2KHz, 20KHz Accuracy: (1.0% + 3d) Input Protection: 600Vr.m.s. TEMPERATURE: Range:-20oC ~ 800oC, -4oF ~ 1472oF Accuracy:-20oC ~ 350oC, -4oF ~ 662oF. (2% + 4oC/8oF)                   351oC ~ 500oC, 663oF ~ 932oF. (2% + 2oC/4oF)                   501oC ~ 800oC, 933oF ~ 1472oF. (3% +2oC/4oF) Resolution: 1oC or 1oF

GENERAL:

Display: 3-1/2 digit LCD with Max. reading of 1999 Polarity: Auto polarity,(-)sign turn on at minus Overrange Indication: "1" or "-1" Low Battery Indication: is displayed when the battery voltage drops below the operating voltage Measurement Rate: 2.5 times per second, normal Operating Temperature: 0oC to +50oC (below 80% R.H.) Storage Temperature: -20oC to +60oC (below 80% R.H.) Temperature Coefficient: 0.15 x (Spec. accuracy)/oC, (< 18oC or >28oC) Power Requirements: Single 9V battery (NEDA 1604, IEC 6F22) Battery Life: 350 hours typical (alkaline) Size: 84mm(W) x 175mm(L) x 31mm(H) Weight: 330 gms Optional Accessories: Test leads, battery (installed) and manual

	AH-90/100 Protective Holster Easy-to Clean, nail hook holster absorbs shocks and protects meter. Lead and probe storage on back, lean or stand in best viewing position.

	AC-90/100 Soft Carrying Case Two way zipper double wall vinyl-leather carrying case for APPA 90/100 series meters. Inside pockets are designed to carry a manual and test lead. Convenient 4.5"(110mm) belt loop accommodates tool belts.

50BK K-type Bead Probe General purpose applications, low cost. Teflon tape insulation. Not suitable for liquid immersion. Measurement range: -40oC to 204oC   (-40oF to 399oF)

50IK K-type Immersion Probe For engine coolant, brake and transmission fluid, other liquids and gels. Protected from tip to handle by an lnconel sheath. Suitable for general temperature measurement applications. Measurement range: -196oC to 800oC   (-320oF to 1472oF)

	APPA 32 AC/DC Current probe Non-instrusive transducing from 0.1A to 600A with 2% basic accuracy. Wide jaw fits over almost any size conductor. Coiled cable with safety banana plug extend up to 1.5 meters. 50 hours typical battery life, 9V battery installed